Inqury

Please choose the best way contact us online!

Description

Power:Electronic

Model Number:SK01

Brand Name:sinoseiki

Lay the fabric to be cut on the rubber mat, place the disk sampler on the fabric, pull out the locking device of the sampler, rotate about 90 degrees, hold the outer cover with one hand, hold the corrugated hand wheel with the other hand, and apply certain pressure, and then rotate the corrugated hand wheel clockwise (the Angle of rotation is greater than 90 degrees), the circular sample can be cut. After the sampler is used, the locking device is rotated to the original position so that the blade cannot be exposed, so as not to hurt hands and other objects. Structure and adjustment Cutter blade for double blade, a total of four pieces of circular external fours uniform, the blade can be replaced, specific operation is: loosen the cross screw (there are four screws on each piece), remove the blade clamp and sampling blade, change a new blade, blade clamp pressure, pay attention to the blade mouth to clockwise tangential, and four pieces of blade in the same plane, then tighten the cross screw. The bottom of the instrument is marked with straight lines, which is used to fix the sample, facilitate cutting and prevent the sample from slipping. Lay the fabric to be cut on the rubber mat, place the disk sampler on the fabric, pull out the locking device of the sampler, rotate about 90 degrees, hold the outer cover with one hand, hold the corrugated hand wheel with the other hand, and apply certain pressure, and then rotate the corrugated hand wheel clockwise (the Angle of rotation is greater than 90 degrees), the circular sample can be cut. After the sampler is used, the locking device is rotated to the original position so that the blade cannot be exposed, so as not to hurt hands and other objects.Structure and adjustmentCutter blade for double blade, a total of four pieces of circular external fours uniform, the blade can be replaced, specific operation is: loosen the cross screw (there are four screws on each piece), remove the blade clamp and sampling blade, change a new blade, blade clamp pressure, pay attention